dr hab. inż. Krzysztof Doliński

Zakład Informatyki i Nauk Obliczeniowych (ZIiNO)
emeryt
telefon: (+48) 22 826 12 81 wew.: 216
pokój: 119
e-mail: kdolin

Doktorat
1977Stochastyczna analiza konstrukcji plastycznych 
promotor -- prof. dr hab. inż. Antoni Sawczuk, IPPT PAN
294 
Habilitacja
1993Stochastyczny model wzrostu szczeliny zmęczeniowej 
Promotor prac doktorskich
1.2009-01-22Mróz Krzysztof  Propagacja szczeliny zmęczeniowej w bimateriale: model matematyczny i rozwiązanie numeryczne624
 

Ostatnie publikacje
1.Mróz K.P., Kucharski S., Doliński K., Bigos A., Mikułowski G., Bełtowska-Lehman E., Nolbrzak P., Failure modes of coatings on steel substrate, BULLETIN OF THE POLISH ACADEMY OF SCIENCES: TECHNICAL SCIENCES, ISSN: 0239-7528, DOI: 10.1515/bpasts-2016-0027, Vol.64, No.1, pp.249-256, 2016

Streszczenie:

The critical monotonic strain of Ni-W and MoS2(Ti,W) coatings on steel substrates was studied. The idea of axisymmetric bending test (called here as coin bending test) limited to monitoring of the coating failure was used. Experiments revealed mechanism of the coating failure, as cracking initiated from coating surface defects and/or substrate was demonstrated using indentation technique. By pushing the center of the uncoated side of a circular plate, the axisymmetric stress state was generated in the coating. The stress components varied gradually from the greatest value in the center to the smallest value at the edge of the specimen. The changes of the sample surface as a result of loading were monitored step by step via optical microscopy.

Słowa kluczowe:

Ni-W coating, MoS2(Ti.W) coating, steel substrate, fracture, coatings strength, axisymmetric bending test

Afiliacje autorów:

Mróz K.P.-IPPT PAN
Kucharski S.-IPPT PAN
Doliński K.-IPPT PAN
Bigos A.-Institute of Metallurgy and Materials Science, Polish Academy of Sciences (PL)
Mikułowski G.-IPPT PAN
Bełtowska-Lehman E.-Institute of Metallurgy and Materials Science, Polish Academy of Sciences (PL)
Nolbrzak P.-Lodz University of Technology (PL)
20p.
2.Mróz K.P., Bigos A., Kucharski S., Doliński K., Bełtowska-Lehman E., Ni-W Electrodeposited Coatings on Low Carbon Steel Substrate: Fatigue Observations, Journal of Materials Engineering and Performance, ISSN: 1059-9495, DOI: 10.1007/s11665-014-1149-7, Vol.23, No.10, pp.3459-3466, 2014

Streszczenie:

The fatigue response of electrodeposited Ni-W on low carbon steel substrate was studied. The considered Ni-W coatings are a promising substitute for toxic hard chromium coatings which, according to EU directives (2000/53/WE, 2011/37/UE), must be eliminated. Specimens of pure substrate and those covered by coating were compared. Coated specimens exhibited lower fatigue resistance under higher stress amplitudes than their non-coated counterparts in stress-controlled fatigue experiments. However, at lower stress amplitudes, the fatigue strength of both specimen types was similar. The cyclic softening of the coatings was demonstrated using indentation techniques.

Słowa kluczowe:

fatigue, hardness, indentation, low carbon steel substrate, Ni-W coatings, S-N curve

Afiliacje autorów:

Mróz K.P.-IPPT PAN
Bigos A.-Institute of Metallurgy and Materials Science, Polish Academy of Sciences (PL)
Kucharski S.-IPPT PAN
Doliński K.-IPPT PAN
Bełtowska-Lehman E.-Institute of Metallurgy and Materials Science, Polish Academy of Sciences (PL)
20p.
3.Petaś M., Mróz K., Doliński K., Damage modeling in graded layer system, ACTA MECHANICA ET AUTOMATICA, ISSN: 1898-4088, DOI: 10.2478/ama-2013-0018, Vol.7, No.2, pp.99-106, 2013

Streszczenie:

The simplified approach to the modelling of low cycle fatigue (LCF) of functionally graded materials (FGM) based on the continuum mechanics is presented. The fatigue damage model takes into account the mechanical part of the load and a constant service temperature. The concept of FGM as a particle-reinforced metal-matrix composite with gradual change of the reinforcement fraction is used. The FGM is considered as a material consisting of homogeneous layers containing different volume fractions of the reinforcement. The variation of the reinforcement fraction changes the material properties for each layer. The different material properties are obtained according to modified rule of mixture. Since the fatigue damage of metal matrix composites is strongly influenced by the inelastic deformation of the metallic matrix, the constitutive equations of LCF damage model are taken into consideration. The combined isotropic/ kinematic hardening model with linear behaviour of isotropic and kinematic parts of hardening is adopted. The damage scalar parameter is associated with the plastic energy dissipation which is used to update the material properties. The fatigue damage model presented in this paper is applied to the fatigue damage analysis of the cooling channel of thruster used in space shuttles and rockets.

Słowa kluczowe:

Fatigue Damage, Low Cycle Fatigue, Functionally Graded Materials, Layers

Afiliacje autorów:

Petaś M.-IPPT PAN
Mróz K.-IPPT PAN
Doliński K.-IPPT PAN
7p.
4.Mróz K.P., Doliński K., The crack growth prediction in homogeneous materials and bimaterial systems, ZAMM-ZEITSCHRIFT FUR ANGEWANDTE MATHEMATIK UND MECHANIK, ISSN: 0044-2267, DOI: 10.1002/zamm.201000012, Vol.90, No.9, pp.721-744, 2010

Streszczenie:

The new criterion determining the angle of crack propagation in mixed mode loading conditions is proposed. Both monotonic and cyclic loading are considered for homogeneous and bimaterial systems. For bimaterial it is assumed that either the crack does not touch or simply crosses the interface during its growth. The angle of the crack propagation corresponds with the direction where the ratio of the dissipation energy generated in the plastic processes to that generated in the decohesion processes reaches its smallest value. The criterion assumes also that the fracture crack propagation follows the direction for which the distortional component of the strain energy density, T D calculated along the line of the constant dilatation energy density T C V around the crack tip reaches its minimum value. The constant value of T C V is associated with the ultimate tensile stress σ C. The criterion involves the T -stress term that represents a constant stress parallel to the main crack orientation. A critical length of the radius of the decohesion zone determines the fracture condition. In the article a numerical method based on the singular integral technique involving the distribution of edge dislocations to represent the actual crack is proposed. The resulting singular integral equations with Cauchy-type singularities are solved numerically. The method allows us to determine the stress intensity factors (SIFs) and T-stress term at the tips of the propagating crack. The results show very good agreement with the numerical data found in the literature. The new equation to determine the fatigue crack growth rate is also proposed and used to trace the fatigue crack path in the homogeneous and bimaterial systems.

Słowa kluczowe:

SIFs, fracture criteria, fatigue crack growth rate, bimaterial, T -stress, singular integral equations, interface

Afiliacje autorów:

Mróz K.P.-IPPT PAN
Doliński K.-IPPT PAN
20p.
5.Doliński K., Mróz K., Zmęczeniowa propagacja szczeliny w bimateriale model matematyczny i rozwiązanie numeryczne, ACTA MECHANICA ET AUTOMATICA, ISSN: 1898-4088, Vol.1, pp.31-35, 2007

Streszczenie:

Praca dotyczy płaskiego zagadnienia wzrostu szczeliny zmęczeniowej w bimateriale powstałym na skutek idealnego zespolenia dwóch materiałów sprężystych. Proponowana metoda umożliwia określenie wzrostu takiej szczeliny, dowolnie usytuowanej w bimateriale. Oparta jest ona na istniejących modelach matematycznych rozwijanych w ramach mechaniki pękania i dających podstawy do wyznaczenia współczynników intensywności naprężeń dla szczelin w bimateriale. Metoda ta pozwala ocenić, dla każdego kolejnego cyklu obciążenia, kierunek propagacji i przyrost długości szczeliny, a w konsekwencji jej drogę i długość będące wynikiem procesu zmęczeniowego. Do tego celu wykorzystany jest dyslokacyjny model szczeliny, który prowadzi do układu osobliwych równań całkowych. Do rozwiązania tego układu równań zaproponowano efektywny algorytm numeryczny.

Afiliacje autorów:

Doliński K.-IPPT PAN
Mróz K.-IPPT PAN
6.Doliński K., Stochastyczny modelwzrostu szczeliny zmęcvzeniowej (Praca habilitacyjna), Prace IPPT - IFTR Reports, ISSN: 2299-3657, No.43, pp.1-176, 1992
7.Doliński K., First Order Approximation and Importance Sampling in Reliability of Structures under Combined Random Load Sequences, Prace IPPT - IFTR Reports, ISSN: 2299-3657, No.21, pp.1-27, 1990
8.Doliński K., Importance Sampling Techniques in Reliability Calculation, Prace IPPT - IFTR Reports, ISSN: 2299-3657, No.37, pp.1-33, 1988
9.Doliński K., Retardation Effect in Fatigue Crack Growth under Stationary Stochastic Loading, Prace IPPT - IFTR Reports, ISSN: 2299-3657, No.43, pp.1-43, 1986
10.Doliński K., Sawczuk A., On the load carrying capacity of slabs on plastic subgrade, BULLETIN OF THE POLISH ACADEMY OF SCIENCES: TECHNICAL SCIENCES, ISSN: 0239-7528, Vol.28, No.7-8, pp.313-321, 1980
11.Doliński K., Kinematic Approach to Reliability Estimate of Stochastically Loaded Plastic Structures, Journal of Structural Mechanics, ISSN: 1539-7734, DOI: 10.1080/03601217808907338, Vol.6, No.3, pp.247-266, 1978

Streszczenie:

A method to evaluate the reliability and to predict the lifetime of rigid-plastic structures is developed when the dynamic loading is a stochastic function of time alone. The method uses the mode approximation assumption relative to the deformed shape of the structure and supposes high reliability of the structure against plastic collapse under static loading. Failure of the structure is understood to be the first crossing of the level of admissible displacements. The random displacement field is determined by numerical simulation limited to the generation of a two-dimensional random variable.

The method is illustrated by means of an example of a simply supported plate uniformly subjected to a stochastically varying pressure. The influence of the statistical parameters of stochastic loading on the reliability and on the lifetime of the structure is discussed.

Afiliacje autorów:

Doliński K.-IPPT PAN
12.Doliński K., Stochastyczna analiza konstrukcji plastycznych (Praca doktorska), Prace IPPT - IFTR Reports, ISSN: 2299-3657, No.25, pp.1-136, 1977
13.Doliński K., Nośność graniczna płyty kołowej o stochastycznym momencie granicznym, Prace IPPT - IFTR Reports, ISSN: 2299-3657, No.28, pp.1-28, 1974

Prace konferencyjne
1.Mróz K.P., Mróz Z., Doliński K., Mixed mode crack growth conditions - critical plane approaches, ECF19, 19th European Conference on Fracture, 2012-08-26/08-31, Kazan (RU), pp.1-8, 2012

Streszczenie:

The crack growth rules are usually specified in terms of the potential energy release or of non local stress or strain criteria. In the present work, the criteria based on the critical plane concept are first discussed and expressed in terms of averaged stress developed in the crack front domain. The transition from tensile to shear fracture is predicted for varying mode mixity ratio.

Słowa kluczowe:

mixed mode crack growth, critical plane, energy conditions, brittle fracture, ductile fracture, SIF, strain energy density, LEFM

Afiliacje autorów:

Mróz K.P.-IPPT PAN
Mróz Z.-IPPT PAN
Doliński K.-IPPT PAN
2.Mróz K.P., Mróz Z., Doliński K., Kryterium energetyczne wzrostu krzywoliniowej trajektorii szczeliny, Zeszyty Naukowe Politechniki Opolskiej, ISSN: 1429-6055, Vol.343, pp.116-119, 2011

Streszczenie:

W pracy rozważono możliwość odchylania się szczeliny dla przypadku gdy KI>0, KII≥0 w dwuosiowym stanie obciążenia. Do analizy wykorzystano dwa kryteria liniowej sprężystej mechaniki pękania (LSMP) uwzględniając efekt naprężenia T: klasyczne kryterium maksymalnych naprężeń obwodowych (MNO) oraz energetyczne kryterium MK [7,8,9]. Przedstawiono po równanie obu kryteriów w odniesieniu do niestabilnego kierunku p ropagacji szczeliny, definiowanego w pracy jako odchylenie się ścieżki propagacji od płaszczyzny początkowej lokalizacji szczeliny. Przedstawiono również porównanie przypadków granicznych z wykorzystaniem modeli wzrostu początkowej szczeliny.

Afiliacje autorów:

Mróz K.P.-IPPT PAN
Mróz Z.-IPPT PAN
Doliński K.-IPPT PAN