mgr inż. Elżbieta Zawidzka |
|
Ostatnie publikacje
1. | Zawidzka E., Zawidzki M., Simulation of simple movements of Arm-Z oblique swivel joint chain manipulator, POMIARY - AUTOMATYKA - ROBOTYKA. PAR, ISSN: 1427-9126, DOI: 10.14313/PAR_248/59, Vol.27, No.2, pp.59-67, 2023 Streszczenie: Arm-Z is a concept of a hyper-redundant manipulator based on linearly joined sequence of congruent modules by oblique swivel joint mechanism. Each module has one degree of freedom only, namely a twist relative to the previous module in the sequence. Although the concept of this type of manipulator is relatively old and simple, its control is very difficult an nonintuitive, which results in a limited use in industrial practice. This paper presents a simple simulation of Arm-Z in Mathematica programming environment which demonstrates a few simple but potentially useful movements. Słowa kluczowe: Arm-Z, Extremely Modular System, hyper-redundant manipulator, Mathematica, oblique swivel joint Afiliacje autorów:
| 100p. | ||||||||||||
2. | Zawidzka E., Zawidzki M., Kiński W.♦, Prototyp ekstremalnie modularnego hiperredundantnego manipulatora Arm-Z, POMIARY - AUTOMATYKA - ROBOTYKA. PAR, ISSN: 1427-9126, DOI: 10.14313/PAR_247/39, Vol.27, No.1, pp.39-44, 2023 Streszczenie:
Słowa kluczowe: Arm-Z, odporność na awarie, sterowanie kształtem ogólnym, systemy modularne Afiliacje autorów:
| 100p. | ||||||||||||
3. | Zawidzka E., Zawidzki M., Discrete (Two-State) Modular Hyper-Redundant Planar Manipulator, COMPUTER ASSISTED METHODS IN ENGINEERING AND SCIENCE, ISSN: 2299-3649, DOI: 10.24423/cames.550, Vol.29, No.4, pp.397-407, 2022 Streszczenie: This paper presents a concept of an extremely simple planar manipulator composed of 24 Słowa kluczowe: discrete manipulator,hyper-redundant,snake robot,modular Afiliacje autorów:
| 70p. | ||||||||||||
4. | Zawidzka E., Szklarski J., Kiński W.♦, Zawidzki M., Prototype of the Arm-Z modular solar tracker, Advances in Intelligent Systems and Computing, ISSN: 2194-5357, DOI: 10.1007/978-3-031-03502-9_28, Vol.1427, pp.273-282, 2022 Streszczenie: Arm-Z - a hyper-redundant manipulator based on linearly joined sequence of congruent units is presented. Each unit has 1-DOF (one degree of freedom) only, namely a twist relative to the previous unit in the sequence. Arm-Z has a potential of being economical and robust. The control of Arm-Z, however, is not intuitive and difficult. This paper presents the preliminary results of designing a prototype of a modular Sun-tracking device comprised of four congruent units with possible application as a solar energy harvester or a Sun-shade. Słowa kluczowe: Extremely modular system, Arm-Z, Hyper-redundant manipulator, Rapid prototyping, Low-tech Afiliacje autorów:
| |||||||||||||
5. | Zawidzka E., Zawidzki M., Kinetic street furniture with Arm-Z, WIT Transactions on The Built Environment, ISSN: 1743-3509, DOI: 10.2495/HPSU220021, Vol.209, pp.15-22, 2022 Streszczenie: Arm-Z is a concept of a hyper-redundant manipulator based on linearly joined sequence of congruent units. Each unit has only one degree of freedom (1-DOF), namely a twist relative to the previous unit in the sequence. Since each module is identical, Arm-Z has a potential of being economical and robust: the modules can be mass-produced and, in case of failure, easily replaced. However, the control of Arm-Z is nonintuitive and difficult, thus it usually requires application of computational intelligence methods. This paper presents a number of concepts for kinetic street furniture based on Arm-Z: a spiral column of adjustable height, a sun-tracking shade/solar energy harvester, bio-mimicry sculpture, kinetic sprinkler/fountain. The proposed concepts are low-tech in principle. Therefore in each case, the first module in the sequence is fastened to a solid base (ground). For simplicity, the drive is applied directly to the first module and transferred to subsequent units by internal gears. Each module is equipped with a set of cylindrical and bevel gears with straight teeth with involute profile (for connecting the modules). Słowa kluczowe: Arm-Z, extremely modular system, low-tech, street furniture Afiliacje autorów:
| |||||||||||||
6. | Zawidzka E., Szklarski J., Zawidzki M., Arm-Z as a modular tracking device, Lecture Notes in Networks and Systems, ISSN: 2367-3389, DOI: 10.1007/978-981-19-1610-6_37, Vol.448, pp.429-437, 2022 Streszczenie: Arm-Z is a hyper-redundant manipulator based on a sequence of linearly joined identical modules. Each module has only one degree of freedom—a twist relative to the previous module. Arm-Z can be potentially economical, as the modules can be mass-produced. Arm-Z is also robust, as the malfunctioning module can be replaced. Moreover, if some modules malfunction, the device can still execute tasks with certain accuracy. However, the disadvantage of Arm-Z is a non-intuitive and difficult control. This paper presents a concept of a modular tracking device comprised of four identical modules. As an example, the Sun-tracking setup is used with possible application for solar energy harvesting. Słowa kluczowe: Extremely modular system, Arm-Z, Hyper-redundant manipulator, Sun-tracking Afiliacje autorów:
| |||||||||||||
7. | Zawidzka E., Kiński W.♦, Zawidzki M., Preliminary prototype of a 4-unit arm-Z hyper-redundant modular manipulator, Advances in Intelligent Systems and Computing, ISSN: 2194-5357, DOI: 10.1007/978-3-030-74893-7_27, pp.285-294, 2021 Streszczenie: Arm-Z is a concept of a robotic manipulator comprised of linearly joined congruent modules with possibility of relative twist. The advantages of Arm-Z are: economization (mass-production) and robustness (modules which failed can be replaced, also if some fail the system can perform certain tasks). Non-intuitive and difficult control are the disadvantages of Arm-Z. It has been introduced over six years ago. The theretofore research focused on the control of the virtual Arm-Z manipulator through the relative twists of its constituent units. This paper documents the fabrication and testing of the preliminary physical prototype of a simple Arm-Z, which has been built using relatively low-tech approach. The modules have been assembled from 3D-printed elements using PET-G filament. Each module is equipped with a transmission mechanism allowing to pre-set the spin of its twist (either positive/right or negative/left). Although the presented system is very simple it demonstrates certain meaningful kinematic actions and sets clear paths for the future research in the area of Extremely Modular Systems. Słowa kluczowe: extremely modular system, arm-Z, hyper-redundant manipulator, rapid prototyping, low-tech Afiliacje autorów:
|
Prace konferencyjne
1. | Zawidzka E., Chikahiro Y.♦, Ario I.♦, Extremely Modular Arm-Z manipulator, The 5th National Convention of the Japan Society of Civil Engineers, 2023-09-14/09-15, Hiroshima (JP), pp.1-2, 2023 |
Abstrakty konferencyjne
1. | Zawidzka E., Chikahiro Y.♦, Ario I.♦, Extremely Modular Arm-Z manipulator, The 5th National Convention of the Japan Society of Civil Engineers, 2023-09-14/09-15, Hiroshima (JP), pp.1-3, 2023 | ||||||||||||||||
2. | Zawidzka E., Zawidzki M., Extremely Modular Hyperredundant Arm-Z for Emergency, The 21th Symposium on Construction Robotics in Japan, 2023-09-05/09-07, Hokkaido (JP), pp.1, 2023 | ||||||||||||||||
3. | Zawidzka E., Tauzowski P., Zawidzki M.♦, Błachowski B., Jankowski Ł., Structural topology optimization of a modular snake-like manipulator, CMM-SolMech 2022, 24th International Conference on Computer Methods in Mechanics; 42nd Solid Mechanics Conference, 2022-09-05/09-08, Świnoujście (PL), pp.1-1, 2022 Streszczenie: This contribution concerns a snake-like robotic manipulator arm proposed first in [1]. The manipulator is composed of linearly but nonaxially joined identical modules with a possibility of relative twist, which amounts to one degree of freedom per module. It is an example of an extremely modular system [2], and its advantages are: economization (due to modularity and possible mass production) and robustness (easy repair by replacement of a failed module). The hitherto research involved the possible geometric transformations of the manipulator arm [3], but not its structural optimization. However, structural design of the involved modules is a challenging task, as the process has to take into account the relative position of the module along the arm, as well as the variety of global configurations of the deployed manipulator. It leads to a multi-load structural optimization problem with a significantly large number of loads. This contribution considers topology optimization of such a modular manipulator structure. Due to the large variety of possible load conditions, the initial analysis involves a 2D model of the structure with a discrete set of two possible relative arrangements of adjacent modules. Such a formulation allows the proposed approach to be preliminarily explored, tested and optimized in a numerically manageable simplified environment. The support of the National Science Centre, Poland, granted under the grant agreement 2019/33/B/ST8/02791 is gratefully acknowledged. Afiliacje autorów:
| ||||||||||||||||
4. | Zawidzka E., Kiński W.♦, Szklarski J., Zawidzki M., Arm-Z: a hyper-redundant modular inspection manipulator (for extreme environments), WEO 2021, 2nd Workshop on Engineering Optimization, 2021-10-07/10-08, Warszawa (PL), pp.1-3, 2021 |