Instytut Podstawowych Problemów Techniki

Streszczenie:

The aim of this paper is to demonstrate the possibilities of estimating the track condition using axle-boxes and car-bodies motions described by acceleration signals. In the paper, the results presented indicate the condition of tracks obtained from the preliminary investigation on the test track. Furthermore, the results from the supervised runs (on Polish Railway Lines) of electric multiple unit (EMU-ED74) with the prototype of track quality monitoring system installed on-board are described. As track quality indicator (TQI) algorithm, used in the mentioned prototype, a modified Karhunen–Loève transformation is used in preliminary preparing acceleration signals. The transformation is used to extract the principal dynamics from measurement data. Obtained results are compared to other methods of evaluating the geometrical track quality, namely methods which apply the Jsynth Synthetic Coefficient and Five Parameters of Defectiveness W5. The results from the investigation showed that track condition estimation is possible with acceptable accuracy for in-service use and for defining cost-effective maintenance strategies.

Słowa kluczowe:

railway track monitoring, wheel–rail interaction, track quality indicator, acceleration signals, experimental investigation, track degradation.

Afiliacje autorów:

Streszczenie:

Following earlier work of the authors [1], we study here the influence of surface imperfections of a certain type on the vertical loading, in particular in the form of fluctuations in the progressive speed of a moving force. The problem is partly associated with another line of work, where we analyzed configurations of regions in the parameter space with qualitatively different solutions for supported beams under moving loads [2]. In this paper, we study the rolling motion of a polygonalised railway wheel on the rail. For uniform guiding motion, the trajectory of the contact point and vertical accelerations are evaluated first in the rigid case, then in the case of elastic and visco-elastic contact. It will be pointed out that a wavy form of the wheel changes considerably the longitudinal velocity of contact points, even for constant speed of the wheel center which can be are as on for instability.

Słowa kluczowe:

Railway mechanics, Contact problem, Wave generation

Afiliacje autorów:

Streszczenie:

The paper is devoted to radial and out-of-plane vibration of railway wheels and to wheelset stability as key elements affecting high-speed vehicle dynamics, noise emission, and safety. In the present study, railway wheel tire is treated as a curved beam with various beam models, and the wheel plates are modeled as Winkler’s elastic foundation. New results are presented concerning the influence of the residual stresses on the corrugation and poligonalization of wheels as well as wave propagation in the wheel tire

Słowa kluczowe:

Elastic wheel, Wheel–rail interaction, Traveling waves, Wheel poligonalization, Corrugation

Afiliacje autorów:

Streszczenie:

The paper deals with the investigation of some phenomena which are essential for dynamic interaction of a wheelset or bogie with the railways track. The track is modeled as discrete–continuous system composed of rails, fastening systems and sleepers interacting with ballast by means of viscous–elastic elements. Transient and stationary problems are investigated. The stationary periodic problems are connected with wave propagation in stopping bound, passing bound and mistuning. In this paper, a review of selected problems and exemplary results of simulation and experimental investigations is given supplemented by a few results of analysis and simulation.

Słowa kluczowe:

Moving load, Resonance, Periodicity, Passing band, Mistuning

Afiliacje autorów:

Streszczenie:

The paper is devoted to the study of dynamical behaviour of railway tracks as continuous systems (rails) supported by periodically spaced sleepers and subjected to moving concentrated loads. Several cases of dynamical problems, where elastically supported beams are excited by a moving concentrated force, are considered. In particular, the study is focused on interactions with structure periodic in the space. Results on one-dimensional structures are extended to the case of a two-dimensional system. The problems of stopping bands, passing bands, and mistuning are also mentioned.

Słowa kluczowe:

railway track, moving load, dubble sleepers, vibration

Afiliacje autorów:

Streszczenie:

The paper is devoted to the experimental, theoretical analysis and computer simulation of influence of elastic properties of contact stiffness and wheel-plate stiffness on the forces of vehicle-track interaction. Three types of wheels are considered with different contact stiffness and wheel-plate design. Exemplary simulation of freight car interaction with track which posses one corrugated rail for each type of wheel is presented.

Słowa kluczowe:

Contact stiffness, Rail corrugation, Elastic wheel, Wheel-rail interaction, Simulation

Afiliacje autorów:

Streszczenie:

W niniejszej pracy rozważana jest stateczność ruchu układu złożonego ze strumienia gęsto rozłożonej masy (oscylatorów) oddziałującego sprężyście lub lepko-sprężyście z belką na podłożu Winkera (np. modelującej rurę). Układ taki może być uproszczonym modelem układu pociąg - tor lub modelem rurociągu, przez który przepływa ciecz (dla uproszczenia nieściśliwa).

Słowa kluczowe:

stateczność przepływu, ruch względny, tłumienie

Afiliacje autorów:

Streszczenie:

The paper is devoted to a computer simulation of brake pad/brake disc dynamic interaction. The main purpose of the studies is a numerical analysis of friction pair dynamics, aiming at describe generation of vibration related to the process of transition phenomena associated with braking. To investigation will be used environment of Automatic Dynamic Analysis of Mechanical Systems. In the analysis is used two-dimensional friction model. The results show the slip-stick and creep phenomenon

Słowa kluczowe:

vibrations excited by friction, self-excited of vibrations, slip-stick, creepage

Afiliacje autorów:

Streszczenie:

We simulate the motion of a corrugated disk over a corrugated track under unilateral elastic contact forces. In particular, the trajectory of the geometrical contact point and the magnitude of normal forces are studied. Effects like generation of waves and cumulation of plastic deformation are considered.

Słowa kluczowe:

railway mechanics, contact geometry, friction, bouncing, wave generation, plastic deformation

Afiliacje autorów:

Streszczenie:

Maximization of the critical force of cracked columns, subjected to generalized follower force is discussed in the paper. The crack is assumed to be formed according to the opening and sliding modes and is modeled by a localized loss of stiffness. Influence of the crack stiffness and its localization on the value of the critical force is analyzed. The optimization process is based on the multimodal approach. The localization of crack with the critical force of the system equal to 137.17 EJ/L2 is found

Słowa kluczowe:

STABILITY CONSTRAINTS, OPTIMIZATION OF CRACKED COLUMNS, FOLLOWER LOAD, localization of crack

Afiliacje autorów:

Streszczenie:

The paper is devoted to an outstanding scientific activity of Professor Karl Popp in applied mechanics and his contribution to Polish-German cooperation. His international collaboration was very impressive. Cooperation with Polish scientists covers over twenty years of his scientific activity. We can mention here by name Polish scientists which cooperate with Professor Popp in the various framework, i.e. beginning with A.v. Humboldt fellows: J. Socha and T. Krzyżyński DAAD fellows: S. Nowakowski, J. Danielski and W. Kurnik, visiting professors: J. Kisilowski and R. Bogacz and a few DFG fellows. The scientific interests of Professor Karl Popp were very extensive and include engineering application of friction, computational methods in engineering (particularly discrete and continuum mechanics), machine dynamics - vibration of machinery, stability, fluid structure interaction, simulation of transportation systems, biomechanics and others. Selected problems were chosen as session topics of German-Polish Workshops on Dynamical Problems of Mechanical Systems and EUROMECH Colloquium 409.

Słowa kluczowe:

Professor Karl Popp, applied mechanics, cooperation in applied mechanics, Karl Popp - scientific activity

Afiliacje autorów:

Streszczenie:

The cost of maintenance and the safety of railway operation depend (among other things) on the quality of the wheel sets interaction with the rails. There is the necessity to monitor the rolling behaviour of regular vehicles. Of most importance is the time behaviour of the travelling contact forces between the wheel sets and the trucks. The rolling wheel set obtains a very different position relative to the track, which creates restraints in the wheel set and the track panel structure, and which will discharge continuously by friction induced vibration. Those vibrations cause corrugation, ballast deterioration, wear, squealing noise and other environmental impacts.

Słowa kluczowe:

wheel sets, railway track, monitoring, motion, rolling performance, system dynamics

Afiliacje autorów:

Streszczenie:

Railway track with classic and Y-shaped sleepers or slab track is composed of two rails that are assumed to be infinitely long and joined with sleepers by viscoelastic pads. Numerous assumptions are used in railway-track modelling, leading to different simplifications. The two-dimensional periodic model of track consists of two parallel infinite Timoshenko beams (rails) coupled with equally spaced sleepers on a viscoelastic foundation. Nowadays the interest of engineers is focused on slab track and track with Y-shaped sleepers. The fundamental qualitative difference between the track with classic and Y-shaped sleepers is related to local longitudinal symmetric or antisymmetric features of the railway track. The sleeper spacing influences the periodicity of the foundation elasticity coefficient, mass density (rotational inertia) and the effective shear rigidity. Track with classic concrete sleepers is affected much more by rotational inertia and shear deflections than track with Y-shaped sleepers. The increase of the elastic-wave velocity in track with Y-shaped sleepers and more uniform load distribution will be proved by analysis and simulation. The analytical and numerical analyses allows us to evaluate the track properties in a range of moderate and high train speeds. However, the correct approach is not simple, since the structure of the track interacts with the wheels, wheelsets and vehicles, which constitute complex inertial loads. We note that the growth of amplitude in selected velocity ranges depends strongly on the track type.

Słowa kluczowe:

Track dynamics, Vibrations, Moving load, Y-type track

Afiliacje autorów:

Streszczenie:

We study periodic structures composed of beams, columns and plates subjected to moving constant or harmonic loads. Such structures occur in civil engineering, e.g. classical tracks or maglev guideways, highways or tarmacs of airports. We discuss the influence of speed and frequencies as well as parameters describing the construction itself.

Słowa kluczowe:

periodic structures, moving constant loads, moving harmonic loads

Afiliacje autorów:

Streszczenie:

The paper contain description of certain dynamical problems connected with the kinematic excitation of railway track. Some phenomena are given which may create high loads, track degradation and fatigue of wheelset axles. An alternative approach to measurement rail vehicle overload are given. Some examples of experimental investigations are given which pointed out that the dynamical load acting on the track can be a few times higher as the static load. In the paper the results obtained from the electromechanical drive model describing the torsion vibration of wheelset caused by passing through gaps in a single rail of track are presented.

Słowa kluczowe:

wheel-rail dynamics, vehicle-track interaction, track and vehicle degradation

Afiliacje autorów:

Streszczenie:

Praca opisuje zagadnienia dynamicznego oddziaływania podziemnego pojazdu szynowego na tor. Oddziaływanie to wywołuje drgania, które za pośrednictwem konstrukcji toru, tunelu oraz gruntu propagowane są na pobliskie konstrukcję i budynki. Ze względu na zagęszczenie ruchu ulicznego podziemna komunikacja jest obecnie jedyną alternatywą płynnego przemieszczania się osób w wielkich aglomeracjach miejskich. Sprzyja to rozwojowi i modernizacji podziemnej kolei miejskiej, w której jako jednym z celów stawianych projektantom jest minimalizacja powstania drgań propagujących się na otaczające środowisko W nauce również można zaobserwować wzrost zainteresowania zjawiskami powstawania i propagacji drgań w gruncie, wywołanych przejazdem pojazdów kolei podziemnej. Głównym pytaniem nurtującym badaczy jest kwestia kontroli układu pojazd/tor i zmniejszenie powstających szkodliwych wibracji i hałasu. Ze względu na wielorakie rozwiązana konstrukcyjne pojazdów i torowisk kolei podziemnej trudno jest zaproponować jednoznaczne rozwiązanie.

Słowa kluczowe:

metro, oddziaływania podziemnego pojazdu szynowego, wibroizolacja, grunt

Afiliacje autorów:

Streszczenie:

We study the rolling motion of a railway wheel on corrugated track. For uniform guiding motion, the trajectory of the contact point, vertical accelerations are evaluated first in the rigid case, then in the case of elastic and visco-elastic contact. Resulting energy dissipation due to friction and percussive effects are calculated and resulting progress of pattern formation is simulated.

Słowa kluczowe:

rolling contact, surface pattern, railway wheel, corrugated track

Afiliacje autorów:

Streszczenie:

We studied several cases of dynamical problems, where the motion is driven by a concentrated force or distributed load applied at a moving position. The velocity of motion is assumed as constant. In particular, we studied interactions with periodic structure of the medium. Earlier results on one-dimensional structuresare extended to the case of an array of plates

Słowa kluczowe:

dynamic, continuous systems, traveling load, oscillating loads

Afiliacje autorów:

Streszczenie:

In the presented paper by means of the continuous model a dynamic interaction between the airport runway and the aircraft landing-gear is considered in order to investigate the controlled cracking process of the initially notched runway plates. For this purpose normal stresses induced by the static and dynamic loads in the runway plate notched areas are going to be determined by means of the continuous mechanical model and analytical mathematical solution of the problem.

Słowa kluczowe:

dynamic load, analytical mathematical solution, airport runway

Afiliacje autorów:

Streszczenie:

Maximization of the critical force of cracked columns, subjected to generalized follower force is discussed in the paper. The crack is assumed to be formed according to the opening and sliding modes and is modeled by a localized loss of stiffness. Influence of the crack stiffness and its localization on the value of the critical force is analyzed. The optimization process is based on the multimodal approach.

Słowa kluczowe:

localization of crackoptimization of cracked columns, stability constraints, follower load,

Afiliacje autorów:

Streszczenie:

Praca zawiera omówienie wybranych zagadnień dynamicznych związanych z kinematycznym wymuszeniem od usterek toru wpływającym na degradację elementów pojazdów szynowych oraz rozwój uszkodzeń infrastruktury. Wskazano zjawiska, które mogą być przyczyną dużych obciążeń współdziałającego ze sobą układu pojazd-tor oraz zagrożenia wypadkami spowodowanymi zmęczeniem materiału elementów takiego układu. Podano przyczyny powstawania i rozwoju pęknięć szyn i osi zestawów kołowych. Przedstawiono przykłady badań doświadczalnych wskazujących na występowanie obciążeń dynamicznych znacznie przekraczających obciążenia statyczne spowodowane oddziaływaniem pojazdu i jego układu napędowego. Omówiono i zamieszczono w pracy wyniki badań teoretycznych uzyskanych z numerycznego modelu napędu pociągu z uwzględnieniem elektromechanicznych sprzęgnięć pomiędzy silnikiem a zestawem kołowym. Model ten pozwolił na analizę niekorzystych drgań skrętnych zestawu kołowego towarzyszących podczas przejazdu przez szczeliny w pojedynczym toku szynowym toru.
Prezentowane w pracy wyniki odniesiono do badań eksperymentalnych. W pracy przedstawiono również zagadnienia dynamiczne związane z samowzbudnością wskazujące na zjawiska, które mogą być przyczyną dużych obciążeń osi zestawów kołowych, jak również toru i ich degradacji oraz uszkodzeń zmęczeniowych tych osi. Zasygnalizowane zostały prawdopodobne przyczyny powstawania wielokrotnie większych od powszechnie uznawanych obciążeń szyn kołami kolejowymi. Podano kilka przykładów eksperymentalnego zbadania dynamicznego oddziaływania zestawów kołowych z torem będącego alternatywnym podejściem do kinematycznego wyjaśniania tego zjawiska.

Słowa kluczowe:

drgania skrętne, uszkodzenia pojazdu i toru, dynamiki toru, badania numeryczne

Afiliacje autorów: