Instytut Podstawowych Problemów Techniki

Streszczenie:

Closed-cell metal foams are lightweight and durable materials resistant to high temperature and harsh conditions, but due to their fully closed porosity they are poor airborne sound absorbers. In this paper a classic method of drilling is used for a nearly closed-cell aluminium foam to open its porous interior to the penetration of acoustic waves propagating in air, thereby increasing the wave energy dissipation inside the pores of the perforated medium. The aim is to investigate whether it is possible to effectively approximate wave propagation and attenuation in industrial perforated heterogeneous materials with originally closed porosity of irregular shape by means of their simplified microstructural representation based on computer tomography scans. The applied multi-scale modelling of sound absorption in foam samples is confronted with impedance tube measurements. Moreover, the collected numerical and experimental data is compared with the corresponding results obtained for perforated solid samples to demonstrate a great benefit coming from the presence of an initially closed porous structure in the foam.

Słowa kluczowe:

closed-cell metal foams, perforation, sound absorption, microstructure effects, dissipated powers

Afiliacje autorów:

Streszczenie:

The microscopic analysis of the different cellulose fibre cement composites is presented. The observations of the fibres in optical microscope in transmitted light and in scanning electron microscope are described. The micro computed tomography (micro-CT) and SEM were used to determine the distribution of the fibres in the matrix. The investigated fibre cement boards were produced by extrusion process and panels were cured in natural conditions. The main goal of the research was application of different microscopic methods to analyze the fibres distribution as a result of a different methods of their production. Micro-CT was used for 3D visualization of fibres distribution in three different fibre cement boards. It was possible to determine the average diameter of the fibres and their concentration using the high-resolution mode of micro-CT scanning procedure. Finally, a procedure which can be applied as a useful tool for analysis of the different procedures used in production of fibre cement boards is described. This procedure can be successfully used in the quality control system of cellulose fibre distribution in cement composites

Słowa kluczowe:

Cellulose fibre reinforced cement boards, Microstructure, Fibre distribution, X-ray microtomography, SEM-EDS analysis

Afiliacje autorów:

Streszczenie:

Fiber cement boards (FCB) microstructure and methods of fabrication are described. The method of X-ray microtomography in application for investigating of FCB microstructure is presented. The cellulose fibers constituting the remarkable reinforcement of the FCB are colorless and too small to be seen applying the standard optical methods. The X-ray microtomography method however enabled the authors to realize three goals within the investigation of the properties of FCB. The length and shape of the fibers could be assessed on specimens' cross-sections. Applying the pseudo 3D visualization it was possible to visualize the cracked regions inside the specimen volume. The case of non-uniform fibers distribution in respect to the board thickness which was impossible to recognize applying the standard visual inspection, was also performed by merging the multiple cross-section images into a single graph

Afiliacje autorów:

Streszczenie:

Two different barite ore (barium sulfate BaSO4) specimens from different localizations were tested and described in this paper. Analysis of the microstructure was performed on polished sections, and on thin sections using X-ray microtomography (micro-CT), and optical microscopy (MO). Microtomography allowed obtaining three-dimensional images of the barite aggregate specimens. In the tomograms, the spatial distribution of the other polluting phases, empty space as well as cracks, pores, and voids – that exceeded ten micrometers of diameter-were possible to visualize. Also, the micro-CT allowed distinguishing between minerals of different density, like SiO2 and BaSO4. Images obtained and analyzed on thin sections with various methods using the optical microscopy in transmitted light delivered additional information on the aggregate microstructure, i.e. allow for estimation of the different kinds of inclusions (like the different density of the minerals) in the investigated specimens. Above methods, which were used in the tests, completed each another in order to supply a set of information on inclusions' distribution and to present the important differences of the barite aggregate specimens microstructure.

Słowa kluczowe:

barite ore, barite aggregate, microstructure, optical microscopy, thin sections analysis, X-ray tomography

Afiliacje autorów:

Streszczenie:

In this paper a method of X-ray microtomography (micro-CT) was employed for a direct insight into a microstructure of fibre cement boards of different quality. Four specimens were subjects of examination. Two parameters were determined to characterize the level of compaction of fibres in concrete matrix: mean-square displacement of migrating virtual particles after 500,000 of time steps and a diffusive tortuosity. The results of the investigation had revealed that fibre cement boards differing in density produce different images after processing with micro-CT method. The effect of microstructure tightening due to saturation using dying agent was also detectable.

Słowa kluczowe:

Fibre cement boards, Delamination of fibres, Computational modelling, X-ray microtomography

Afiliacje autorów:

Streszczenie:

The paper presents a method of pore connectivity analysis applied to specimens of cement based composites differing in water to cement ratio. The method employed X-ray microtomography (micro-CT). Microtomography supplied digitized three-dimensional radiographs of small concrete specimens. The data derived from the radiographs were applied as an input into the application based on the algorithm called ‘random walk simulation’. As the result a parameter called diffusive tortuosity was established and compared with estimated porosity of examined specimens.

Artykuł prezentuje metodę wyznaczania parametru charakteryzującego intensywność połączeń mikroporów w zastosowaniu do próbek kompozytów z matrycą cementową, różniących się stosunkiem wodnocementowym. Metoda bazuje na wynikach badań z zastosowaniem mikrotomografii rentgenowskiej. Analizowano zdigitizowane zestawy danych, opisujące trójwymiarową reprezentację mikrostruktury niewielkich próbek wykonanych z betonu. Przygotowane w ten sposób skany mikrostruktury zastosowano jako dane wejściowe wprowadzone do oprogramowania wykorzystujacego algorytm ‘przypadkowo migrujących cząstek wirtualnych’. W ten sposób wyznaczono parametr mikrostruktury znany jako krętość dyfuzyjna. Parametr ten porównano z porowatością obserwowaną wyznaczoną dla zbadanych próbek przy wykorzystaniu analizy jasności voxeli w analizowanych próbkach.

Słowa kluczowe:

X-ray tomography, concrete microstructure, diffusive tortuosity

Afiliacje autorów:

Streszczenie:

In the paper two advanced methods for testing cement based composites are described and compared. These are X-ray microtomography and optical microscopy. Microtomography supplies three-dimensional images of small concrete specimens. In the tomograms all cracks, pores and other voids and inclusions, that exceed a few micrometers, are shown. Such visualisation can become a valuable tool for analysis of the basic material properties. Images obtained on thin sections and analysed with various methods on optical microscopes supply additional information on material microstructure that cannot be obtained in tomograms. For example it is relatively easy to determine zone penetrated by CO2 ingress. These two methods, presented on examples of tests, complete each another in order to supply a set of information on composition and defects of tested composite materials.

Słowa kluczowe:

cement matrix composites, concrete deterioration, X-ray tomography, microscopic analysis, concrete microstructure

Afiliacje autorów:

Streszczenie:

Despite very good mechanical and physical properties such as lightness, rigidity and high thermal conductivity, closed-porosity metal foams alone are usually poor acoustic treatments. However, relatively low production cost weighs them in many applications in favour of their open-cell equivalents. In the present paper, this attractive and popular material is subject to consideration from the point of view of the improvement of its sound absorption characteristics. A classic method of perforation is proposed to open the porous interior of the medium to the penetration of acoustic waves and therefore enhance the dissipation of their energy. The interaction between the perforation diameter and closed-cell microstructure as well as its impact on the overall sound absorption of a similar foam were already studied in 2010 by Chevillotte, Perrot and Panneton, so these topics are not discussed much in this work. On the other hand, the objective here is to investigate if one can efficiently approximate the wave propagation phenomenon in real perforated heterogeneous materials with closed porosity of irregular shape by means of their simplified three-dimensional representation at the micro-level. The applied multi-scale modelling of sound absorption was confronted with measurements performed in an impedance tube. Moreover, as expected, numerical and experimental comparisons with relevant perforated solid samples show great benefit coming from the presence of a porous structure in the foam, although it was initially closed.

Afiliacje autorów:

Streszczenie:

In the paper a method of X-ray microtomography (micro-CT) was employed for a direct insight into a microstructure of concrete with a practical resolution of approx. 10 micrometers3. Two sets of specimens were subjects of examination. The spatial concentration of air pores was investigated in three concretes differing in the amount of the supplement of high calcium fly ash (HCFA). The parameter of pore connectivity called diffusive tortuosity was determined in three other concretes made of the same ingredients but differing in water to cement ratio. The quantitative results obtained with application of described procedures are applicable in material characterization.

Słowa kluczowe:

X-ray microtomography, concrete, microstructure

Afiliacje autorów:

Streszczenie:

The durability of concrete in outdoor structures is closely related to its resistance against the aggressive gaseous actions coming from the environment and including influence of oxygen, nitrogen, carbon dioxide. The pore system and its interconnectivity in the concrete matrix directly influence the possibility of penetration of various aggressive gaseous media into concrete structure. The X-ray microtomography (micro-CT) is a modern, non-invasive technique enabling for determination of existing pores in the microstructure of concrete matrix. In the paper the results of investigation of two different concretes by the application of micro-CT method to micro-cores are presented. The quantitative information on the parameters of the analysed microstructure can improve the methods of material characterization available up to now.

Słowa kluczowe:

X-ray microtomography, concrete, microstructure

Afiliacje autorów: