| Partner: M. Storm |
Ostatnie publikacje
| 1. | Zeller-Plumhoff B.♦, Laipple D.♦, Słomińska H., Iskhakova K.♦, Longo E.♦, Hermann A.♦, Flenner S.♦, Greving I.♦, Storm M.♦, Willumeit-Romer R.♦, Evaluating the morphology of the degradation layer of pure magnesium via 3D imaging at resolutions below 40 nm, Bioactive Materials, ISSN: 2452-199X, DOI: 10.1016/j.bioactmat.2021.04.009, Vol.6, No.12, pp.4368-4376, 2021 Streszczenie: Magnesium is attractive for the application as a temporary bone implant due to its inherent biodegradability, non-toxicity and suitable mechanical properties. The degradation process of magnesium in physiological environments is complex and is thought to be a diffusion-limited transport problem. We use a multi-scale imaging approach using micro computed tomography and transmission X-ray microscopy (TXM) at resolutions below 40 nm. Thus, we are able to evaluate the nanoporosity of the degradation layer and infer its impact on the degradation process of pure magnesium in two physiological solutions. Magnesium samples were degraded in simulated body fluid (SBF) or Dulbecco's modified Eagle's medium (DMEM) with 10% fetal bovine serum (FBS) for one to four weeks. TXM reveals the three-dimensional interconnected pore network within the degradation layer for both solutions. The pore network morphology and degradation layer composition are similar for all samples. By contrast, the degradation layer thickness in samples degraded in SBF was significantly higher and more inhomogeneous than in DMEM+10%FBS. Distinct features could be observed within the degradation layer of samples degraded in SBF, suggesting the formation of microgalvanic cells, which are not present in samples degraded in DMEM+10%FBS. The results suggest that the nanoporosity of the degradation layer and the resulting ion diffusion processes therein have a limited influence on the overall degradation process. This indicates that the influence of organic components on the dampening of the degradation rate by the suppression of microgalvanic degradation is much greater in the present study. Słowa kluczowe: magnesium degradation, porosity, transmission X-ray microscopy, 3D imaging Afiliacje autorów:
|  | 200p. | ||||||||||||||||||||||||||||||||||||
| 2. | Zeller-Plumhoff B.♦, Robisch A.L.♦, Pelliccia D.♦, Longo E.♦, Słomińska H.♦, Hermann A.♦, Krenkel M.♦, Storm M.♦, Estrin Y.♦, Willumeit-Römer R.♦, Salditt T.♦, Orlov D.♦, Nanotomographic evaluation of precipitate structure evolution in a Mg–Zn–Zr alloy during plastic deformation, Scientific Reports, ISSN: 2045-2322, DOI: 10.1038/s41598-020-72964-x, Vol.10, pp.16101-1-9, 2020 Streszczenie: Magnesium and its alloys attract increasingly wide attention in various fields, ranging from transport to medical solutions, due to their outstanding structural and degradation properties. These properties can be tailored through alloying and thermo-mechanical processing, which is often complex and multi-step, thus requiring in-depth analysis. In this work, we demonstrate the capability of synchrotron-based nanotomographic X-ray imaging methods, namely holotomography and transmission X-ray microscopy, for the quantitative 3D analysis of the evolution of intermetallic precipitate (particle) morphology and distribution in magnesium alloy Mg–5.78Zn-0.44Zr subjected to a complex multi-step processing. A rich history of variation of the intermetallic particle structure in the processed alloy provided a testbed for challenging the analytical capabilities of the imaging modalities studied. The main features of the evolving precipitate structure revealed earlier by traditional light and electron microscopy methods were confirmed by the 3D techniques of synchrotron-based X-ray imaging. We further demonstrated that synchrotron-based X-ray imaging enabled uncovering finer details of the variation of particle morphology and number density at various stages of processing—above and beyond the information provided by visible light and electron microscopy. Afiliacje autorów:
|  | 140p. |