Instytut Podstawowych Problemów Techniki

Streszczenie:

Emergency bridges are used to restore the lifeline of damaged bridges after disasters. However, the design specification of existing emergency bridges do not afford rapid bridging. Therefore, a trial deployable bridge (Scissors Bridge) using a scissors structure that folds compactly has been experimentally produced. But, the assembly process for the bridge has not been considered and there are no practical design examples or design methods for scissors bridges. In this paper, as for existing bridges, we established a design method of scissors bridges when considering the live load. In addition, a general-purpose member cross-sectional dimension optimization method, aimed at minimizing weight, was developed and proposed. Considering the problem of insufficient strength of the scissors bridge, the optimum reinforcing pattern and its cross-sectional dimensions were determined through two methods of reinforcement and optimization of the cross-sectional dimension of the member. Finally, a trial of practical design calculation was performed using the results of the study to determine whether a scissors bridge satisfying the standard of the Specifications for Highway Bridges can be designed.

Słowa kluczowe:

scissors structure,deployable bridge,stress analysis

Afiliacje autorów:

Streszczenie:

This paper presents equilibrium mechanics and a finite element model for analysing a scissor structure that contains pivots with zero bending stiffness representing structural instability. The pivot at the centre of each structural unit, which is a feature of scissor structures, can be used to transfer the displacement between the units. It cannot, however, transfer the rotation between these units, and the angular stiffness must be considered independently for each unit. To construct a general model of the scissor structure, a scissor unit was developed using the left and right boundary connections of adjacent units to simulate a periodically symmetric structure. The proposed method allows us to obtain an accurate distribution of the internal forces and deflections without the use of special elements to account for central pivots.

Słowa kluczowe:

scissor structure, deployable structure, smart bridge, scissors finite element, equilibrium mechanics

Afiliacje autorów:

Streszczenie:

Scissors mechanisms are commonly used in safety engineering during the construction of temporary structures, owing to their inherent advantages of foldability, transformability, and reusability. We effectively utilized these scissors mechanism features to develop a lightweight, deployable emergency Mobile Bridge (MB) based on optimization, and control of the folding structure. Here, we discuss the problems of optimal reinforcement layout for the MB by formulating and solving three optimization problems, namely: (a) the load capacity maximization problem, (b) the weight minimization problem, and (c) coupling the load capacity maximization problem and the weight minimization problem. The potential benefits resulting from the application of reinforcement were evaluated using a combination of finite element analysis and an optimization algorithm based on the differential evolution method. The results demonstrate the significant positive influence of the additional reinforcing members. In particular, the limit load was increased by over 10 times, while the weight was decreased to approximately half. The proposed methodology enabled the development of a substantially improved version of the MB characterized by a higher load capacity and lower weight in comparison to the initial bridge design.

Afiliacje autorów:

Streszczenie:

Mobile Bridge™ is a deployable bridge that uses a scissors mechanism to achieve its useful structural form. The bridge has a compact size in its undeployed state and can be transported easily to where it is needed. Its rapid deployment makes this type of bridge very useful in areas struck by natural disasters by enabling vehicles to cross terrain that has been made impassable. In previous research, experiments and analyses were conducted on a small-scale bridge designed for pedestrians. In order to consider a bridge of increased size, it is necessary to assess whether design and analysis techniques of the small scale bridge are applicable to the full-scale one. In this paper, we consider a full-scale deployable bridge with a lower deck and two scissor units, that allows for a light vehicle to pass across. We have carried out a light vehicle loading test in order to investigate its basic structural characteristics. Furthermore, the paper presents the theoretical design method and numerical models based on the experimental work followed by validation and comparison with the obtained experimental values.

Słowa kluczowe:

Full-scale Mobile Bridge, Scissor type of emergency bridge, Scissors mechanism, Vehicle loading test

Afiliacje autorów:

Streszczenie:

Emergency bridges are used to restore the lifeline of damaged bridges after
disasters. However, the design specification of existing emergency bridges do not afford rapid
bridging. Therefore, a trial deployable bridge (Scissors Bridge) using a scissors structure that
folds compactly has been experimentally produced. But, the assembly process for the bridge has
not been considered and there are no practical design examples or design methods for scissors
bridges. In this paper, as for existing bridges, we established a design method of scissors bridges
when considering the live load. In addition, a general-purpose member cross-sectional dimension
optimization method, aimed at minimizing weight, was developed and proposed. Considering
the problem of insufficient strength of the scissors bridge, the optimum reinforcing pattern
and its cross-sectional dimensions were determined through two methods of reinforcement and
optimization of the cross-sectional dimension of the member. Finally, a trial of practical design
calculation was performed using the results of the study to determine whether a scissors bridge
satisfying the standard of the Specifications for Highway Bridges can be designed.

Afiliacje autorów:

Streszczenie:

We have experienced many times a phenomenon in which a bridge is washed away due to a typhoon, heavy rain in the rainy season, localized torrential rain, tsunami, and other flood disasters, or in which a bridge is damaged by an earthquake or a tremor. There is accordingly increasing demand for new technology and science to restore bridges that have been washed away or damaged. The paper presents a new type of emergency bridge, called Mobile Bridge™(MB), which can be quickly constructed in case of damages after a natural disaster. The concept of the bridge is based on the application of scissor-type mechanism, which provides its rapid deployment. Up to now several experimental MBs of different size were constructed and tested. The presented research reviews fundamental numerical and experimental results for the MB version 4.0 (MB4.0). Experimental testing included strain and acceleration measurements in free and forced loading conditions. From these results, it was possible to estimate basic dynamic characteristics of the bridge. Besides, in order to provide a basis for development of new construction methods for structural reinforcement and suppression of vibrations, various numerical analyses were conducted. The conducted research allows for a better and safer design of the movable and foldable full-scale bridge, the MB.

Słowa kluczowe:

deployable bridge, scissors-type bridge, emergency bridge, light-weight structure, temporary bridge

Afiliacje autorów:

Streszczenie:

The paper presents a new type of emergency bridge, which can be quickly constructed in case of damages after a natural disaster. The concept of the bridge is based on the application of scissor-type mechanism, which provides its rapid deployment. In case of deployable structures apart from static analysis of different configurations of expansion, it is very important to investigate the dynamic behavior of the system. High compliance and flexibility of the scissors-type bridge may influence user's comfort and safety in case of heavy dynamic loads such as human induced impacts, wind gusts or earthquakes. Up to now, the authors constructed several types of the experimental MBs. The presented research reviews fundamental numerical and experimental results for the Mobile Bridge 4.0. Experimental testing included strain and acceleration measurements in free and forced loading conditions. From these results, it was possible to estimate basic mechanics characteristics, that is statics and dynamic property, of the bridge. The conducted research allows for a better and safer design of the structure of the Mobile Bridge.

Słowa kluczowe:

Deployable Bridge, Scissors-type bridge, Emergency Bridge, Dynamic property, Natural frequency, Acceleration measurement

Afiliacje autorów:

Streszczenie:

This contribution presents the concept of smart, deployable skeletal structures along with existing and prospective applications. The first part introduce s the concept of multi-folding, which is the basis for the design of all smart deployable skeletal structures. In the second part three diverse innovative applications are described: deployable mobile bridge, adaptive impact absorber and controllable valve.

Słowa kluczowe:

smart skeletal structures, adaptive impact absorption, safety engineering

Afiliacje autorów:

Streszczenie:

Multiple bifurcations due to symmetry are often encountered when analyzing nonlinear motifs of nano-mechanics or structures with axial multiple symmetry. The location of multiple bifurcation points and bifurcation path tracing become problems in numerical analysis. In this paper, as a solution to this problem, the a priori information of group-theoretic bifurcation theory is applied. By utilizing the irreducible representation of the dihedral group, we propose to represent the initial imperfection vectors according to the difference in symmetry of the structural system. A part of the tangent stiffness matrix is corrected by coordinate transformations, and
the modified stiffness method is proposed to separate the multiple bifurcation points to a single point in the direction of the bifurcation path. As a numerical analysis example, a bifurcation analysis of a fullerene structure is performed to demonstrate the feasibility of the presented method.

Słowa kluczowe:

Graph-theory, Bifurcation, Imperfection, Fulerene, Dihedral group

Afiliacje autorów:

Streszczenie:

The world has seen many kinds of natural disasters, which have critically influenced the residents' lives by causing damage to infrastructure. To realize rapid rescue efforts in an emergency situation, we propose a deployable emergency bridge, called Mobile Bridge TM [1], based on the theory of foldable structures[2]and the concept of Multi-Folding Microstructures (MFM)[3]. The current research presents the fundamental,numerical and experimental results obtained for the pedestrian and vehicle Mobile Bridges. In this paper, it is considered the localized linearization problem with the fixed an angle although this bridge contains a geometrical nonlinearity of scissors structure. Additionally, a seismic response analysis is conducted for the case where the Mobile Bridge is used in the disaster area as an emergency bridge. This allows for a better and safer structural design of the Mobile Bridge, which is patented in [4],[5].

Afiliacje autorów:

Streszczenie:

The paper presents a new type of emergency bridge, which can be quickly constructed in case of damages after a natural disaster. The concept of the bridge is based on the application of scissor-type mechanism, which provides its rapid deployment. In case of deployable structures apart from static analysis of different configurations of expansion, it is very important to investigate the dynamic behavior of the system. High compliance and flexibility of the scissors-type bridge may influence user's comfort and safety in case of heavy dynamic loads such as human induced impacts, wind gusts or earthquakes. Up to now, the authors constructed several types of the experimental MBs. The presented research reviews fundamental numerical and experimental results for the Mobile Bridge 4.0. Experimental testing included strain and acceleration measurements in free and forced loading conditions. From these results, it was possible to estimate basic mechanics characteristics, that is statics and dynamic property, of the bridge. The conducted research allows for a better and safer design of the structure of the Mobile Bridge.

Słowa kluczowe:

Deployable Bridge, Scissors-type bridge, Emergency Bridge, Dynamic property, Natural frequency, Acceleration measurement

Afiliacje autorów:

Słowa kluczowe:

scissor type of bridge, emergency bridge, strut reinforcement, sectional optimization

Afiliacje autorów:

Streszczenie:

Many natural disasters such as earthquakes, floods, torrential rains occur around the world, and we to undertake quick rescue actions. However, there are many recovery problems because of the occurrence of secondary disasters at each rescue worksite.So, from the previous study of optimal structures and control regulation of MFM[1]-[2], we propose a new type of foldable bridge with scissors structure called Mobile Bridge[3]. Applying scissors mechanism to bridge form, Mobile Bridge provides not only mobility but also good structural performance, because the whole bridge can be expand or fold quickly. In this paper, we discuss the vehicles passing test on the real scale Mobile Bridge in order to evaluate the design method and application limits.

Słowa kluczowe:

Mobile Bridge, deployable structures, temporary bridges, scissors-type structures

Afiliacje autorów:

Streszczenie:

Dissipation of the energy in mechanical systems is a vitally important engineering and scientific problem. Current stringent safety requirements enforce substantial change of methods of structural design and application of new solutions and technologies which ensure structural integrity.
Currently applied passive safety systems are typically not equipped with control devices. Their dynamic characteristics remains unaltered and thus it is well adjusted to a narrow range of actual loadings. In case of impact loading, it is highly advantageous to apply systems of Adaptive Impact Absorption (AIA), which are capable of fast change of the dynamic characteristics. Recent fast development of the material technologies and, in particular, development in the field of functional (smart) materials and electronic measurement and control systems had created new possibilities of practical applications of the AIA systems.
During the adaptation process the choice of optimal control strategy is followed by adjustment of the dynamic characteristics of adaptive elements of the absorber. These elements can entirely made of functional materials (as e.g. shape memory alloys) or, alternatively, they can be equipped with controllable devices, so-called structural fuses, which provide controlled response of the element. Depending on type of applied control, the changes of structural parameters occur only once (usually before impact) or they are controlled in real time during the impact process.
The systems of Adaptive Impact Absorption can be effectively used to increase the level of safety during the action of the impact loading. In particular, very promising results are obtained with the use of adaptive inflatable structures. However, the possibilities of their practical applications are limited due to the lack methods allowing for the efficient and fast control of the gas flow during impact.
The presented work focuses on the pneumatic adaptive impact absorbing system equipped with a novel, high performance valve, which utilizes bistable snap-through effect. Snap-through effects are mainly the subject of theoretical analysis and they do not find many practical engineering applications.

Słowa kluczowe:

smart structures, high performance valves, adaptive pneumatic systems, adaptive impact absorption

Afiliacje autorów: